Ad Radar

FORUMS

Item Posts    Sort Order

Got compression/spark, but still won't start...help!

 
mitsudodge89mightyho
New User
Posts: 2
Joined: 02/11
Posted: 02/19/11 06:31 PM

ok, i have replaced plugs, wires, head gasket, ignition coil, ignition ballast resistor and fuel pump.  i have spark and compression, but yet, my truck still will not start.  it will turn over, but it will not catch and run.  we have been trouble shooting for 4 days now and still can not figure it out.  does anyone know what it could be?  and timing has been set correctly as well.  please help.  if you think of anything that we could have overlooked, or something that you would try, please let me know. Confused  Mad  

Post Reply
ReArAnGeD
User
Posts: 63
Joined: 01/11
Posted: 02/19/11 10:11 PM

sometimes if u dont have good enough ground on your starter or your alternator it will not get the right amperage......other than that if u have fuel injection your injectors could be bad....or posibbly fuel pump or sending unit....also check all vacuum lines  

Post Reply
Rlapointe87
User
Posts: 71
Joined: 10/10
Posted: 02/20/11 02:41 PM

Crank position sensor? Just a sugg  

Post Reply
robertbaird
New User
Posts: 16
Joined: 11/13
Posted: 02/28/14 11:48 PM

I think you should check alternator and battery. and figure out compressor wires.

after doing this please make a thread again.

http://mini-truck-parts.com  

Post Reply

BROWSE ARTICLES BY:

Subscribe Today and Save up to 83%!

Subscribe Truck Trend Magazine

Subscribe to:

Truck Trend
Magazine

PRINT DIGITAL
Subscribe Diesel Power Magazine

Subscribe to:

Diesel Power
Magazine

PRINT DIGITAL
Subscribe Truckin Magazine

Subscribe to:

Truckin
Magazine

PRINT DIGITAL
SUBSCRIBE TO A MAGAZINE
TO TOP